Category:Application Notes: Difference between revisions
Eugenbeluga (talk | contribs) No edit summary |
Eugenbeluga (talk | contribs) No edit summary |
||
| Line 52: | Line 52: | ||
[[Implementation details for Intel EMGD graphic drivers on conga-QA6/CA6 modules (AN23)]] | [[Implementation details for Intel EMGD graphic drivers on conga-QA6/CA6 modules (AN23)]] | ||
== Design Notes == | == Hardware Design Notes == | ||
[[Coating Guidelines]] | [[Coating Guidelines]] | ||
Revision as of 20:45, 28 November 2024
BIOS
BIOS Capsule Update Guide: Secure Firmware Updating Process
Secure Boot BIOS Customization (AN39)
BIOS Update and Write Protection (AN05)
System Configuration and Customization
Create and add a HDA verb table module to a congatec BIOS (AN20)
Create and add a Boot Logo (AN11)
Create and add an OEM ACPI SLIC table module to a congatec BIOS (AN21)
Fan Speed Control Settings in congatec Board Controller
How to Use TLC and pSLC Modes on the Same eMMC
Real-Time Applications: BIOS Setup Settings and Advice (AN40)
Enable Wake on LAN in Windows and Linux (AN54)
Installation and Update of NXP MFGTool and congatec Bootloader Profiles (AN33)
Implementation details for Intel EMGD graphic drivers on conga-QA6/CA6 modules (AN23)
Hardware Design Notes
How to Test Signal Integrity of High-Speed Interfaces
M.2™ Pinout Descriptions and Reference Designs (AN43)
PCIe 4.0 Design Considerations for COM Express Carrier Boards (AN53)
PCI Express Reference Clock Design Considerations (AN45)
SPI TPM Reference Design (AN46)
10GbE LAN LED Design Notes for COM Express Type 7 Modules (AN41)
USB 3.2 Gen2 Carrier Board Design Considerations (AN37)
Troubleshooting
How to create a bootable USB stick with a UEFI shell (AN31)
Windows Installation without using USB powered ROM drive (AN22)
Pages in category "Application Notes"
The following 61 pages are in this category, out of 61 total.
B
H
- How to Configure iSCSI Boot in BIOS
- How to build a Kernel with Vmalloc Patch
- How to create a bootable USB stick with a UEFI shell (AN31)
- How to Enable Intel AMT
- How to Test Signal Integrity of High-Speed Interfaces
- Hypervisor on Module (AN56)
- How to Use TLC and pSLC Modes on the Same eMMC
- How to Implement SD Express on a Career Board
C
- COMe Rev. 3.1 vs. Rev. 3.0 Update Overview
- Configure RAID System (AN15)
- Congatec System Utility - CGUTIL
- Create and add a HDA verb table module to a congatec BIOS (AN20)
- Create and add an OEM ACPI SLIC table module to a congatec BIOS (AN21)
- Create and add a Boot Logo (AN11)
- Create OEM Default Map (AN08)
- Coating Guidelines