Category:Application Notes
This is the category for Application Notes (AN). The pages are sorted alphabetically without the prefix "AN".
Pages in category "Application Notes"
The following 74 pages are in this category, out of 74 total.
U
- USB Device Mode (USB-C only) on conga-HPC/3.5-Mini
- U.2 Introduction (AN44)
- UEFI Script Files (AN48)
- UEFI Shell Debugging (AN51)
- USB 3.2 Gen2 Carrier Board Design Considerations (AN37)
- USB4 Design Considerations
- USB Device Mode (USB-C only) on conga-HPC/EVAL-Client
- USB Device Mode (USB-C only) on conga-HPC/EVAL-Mini
- USB Device Mode (USB-C only) on conga-TEVAL3/COMe
- USB PD Controller Runtime Reconfiguration
- USB Power Delivery (USB PD)
- UUU Tool Usage
B
H
C
- CGOS Driver and CGUTIL Releases
- COMe Rev. 3.1 vs. Rev. 3.0 Update Overview
- Configure RAID System (AN15)
- Congatec System Utility - CGUTIL
- Create and add a HDA verb table module to a congatec BIOS (AN20)
- Create and add an OEM ACPI SLIC table module to a congatec BIOS (AN21)
- Create and add a Boot Logo (AN11)
- Create OEM Default Map (AN08)
- Coating Guidelines
E
G
I
- Implementation details for Intel EMGD graphic drivers on conga-QA6/CA6 modules (AN23)
- Installation and Update of NXP MFGTool and congatec Bootloader Profiles (AN33)
- Intel Boot Guard vs Secure Boot
- Interposer and HSIO for COM Express® Type 7 Denverton
- Interposer for COM Express® Type 7 Broadwell DE
- Impact of Temperature on the Accuracy of Real-Time Clock