Category:Application Notes

BIOS

BIOS Update (AN01)

BIOS Capsule Update Guide: Secure Firmware Updating Process

Secure Boot BIOS Customization (AN39)

BIOS Setup Description (AN42)

BIOS Update and Write Protection (AN05)

External BIOS Update (AN07)

Remote Control (AN02)

System Configuration and Customization

Create and add a HDA verb table module to a congatec BIOS (AN20)

Create and add a Boot Logo (AN11)

Create OEM Default Map (AN08)

Create and add an OEM ACPI SLIC table module to a congatec BIOS (AN21)

OEM Setup Modification (AN35)

OEM SMBIOS/DMI tables (AN34)

UEFI Script Files (AN48)

Modify EPI File (AN12)

Fan Speed Control Settings in congatec Board Controller

Configure RAID System (AN15)

S5e Implementation (AN36)

How to Use TLC and pSLC Modes on the Same eMMC

Real-Time Applications: BIOS Setup Settings and Advice (AN40)

Hypervisor on Module (AN56)

Enable Wake on LAN in Windows and Linux (AN54)

Installation and Update of NXP MFGTool and congatec Bootloader Profiles (AN33)

Implementation details for Intel EMGD graphic drivers on conga-QA6/CA6 modules (AN23)

Hardware Design

USB 3.2 Gen2 Carrier Board Design Considerations (AN37)

M.2™ Pinout Descriptions and Reference Designs (AN43)

PCIe 4.0 Design Considerations for COM Express Carrier Boards (AN53)

PCI Express Reference Clock Design Considerations (AN45)

RTC Battery Lifetime (AN09)

EMMC Lifetime (AN50)

SPI TPM Reference Design (AN46)

10GbE LAN LED Design Notes for COM Express Type 7 Modules (AN41)

U.2 Introduction (AN44)

Coating Guidelines

Troubleshooting

How to create a bootable USB stick with a UEFI shell (AN31)

PCIe Link Configuration at Runtime (AN38)

UEFI Shell Debugging (AN51)

How to Test Signal Integrity of High-Speed Interfaces

Windows Installation without using USB powered ROM drive (AN22)